QS-S4 LCD Zero LCD Ekranas spidomentras
49,00 €

40.5€ Be PVM

Sblizingas.lt - naujasdizainas.com
Paskutinė prekė

Tinka visiems 24-60V modeliams kaip

Zero 10X, Mantis, Kugoo


Saugus apsipirkimas


Išsiunčiame ta pačią dieną


Grąžinkite per 14 dienų

QS-S4 Settings Explained

The QS-S4 is designed in such a way to be compatible with a wide range of electric scooters (and even e-bikes) that operate on different voltages, with different motors and tire sizes (among other things).

For specific settings for your electric scooter (including factory default), lookup your scooter settings in our database.

P0 — Wheel diameter.  P0 is used for computing speed and odometer by measuring the motor RPM.  If your speed isn’t being reported correctly, P0 is likely the culprit.

P1 — LCD brightness OR Battery voltage protection. Depending on your scooter this setting will control something either as benign as the LCD backlight brightness or the critical battery voltage protection.

P2 — Display units OR Motor poles.  Depending on your scooter, this setting will control whether units are displayed in imperial (mph) or metric (kmh) or the number of poles in your motor.  Motor pole settings are specific to scooter models and necessary so that the controller drives the motor phases at the correct frequencies for best performance.

P3 — Battery voltage. Typically sets the maximum battery voltage, and allows the display to correctly report remaining battery percentage.

P4 — Display sleep time. Sets the timer for how long the display will remain on without activity before powering itself off.

P5 — Zero start.  Enables or disables “zero start” feature which allows the scooter to be launched from 0 mph.  When disabled, the scooter must be rolling a low speed before the motor will activate.

P6 — Wheel diameter OR cruise control. Either sets the wheel diameter (see P0) or enables/disables cruise control.

P7 — Motor poles OR acceleration speed.  Either sets the number of motor poles (see P2) or is used to increase or decrease acceleration speed.

P8 — Motor power OR regenerative brake strength.  Either sets the maximum motor power or controls the strength of the electronic brake.  For those trying to get the most performance out of their scooter, they’ll want to max out motor power.

P9 — Zero start OR electronic brake strength.  See P5 and P8.

P11 — Regenerative brake strength.  See P8.

P12 — Acceleration speed.  See P7.

P13 — Unused.

P14 — Unused.

P15 — Display sleep time.  See P4.

P16 — Lifetime odometer reset. You can use this to reset the lifetime odometer.

P17 — Cruise control OR Auto lights-on.  See P6 for cruise control. Controls whether lights automatically come on.

P99 — QS-S4 reset. Resets all on the QS-S4 throttle.

PA — Lifetime odometer reset. See P16. 

PB — Display sleep time.  See P4.

PC — LCD display brightness.  See P1.

2 Prekės

Specific References


Pridėti atsiliepimą

Jūsų el. Pašto adresas nebus skelbiamas*

Greitas pristatymas

Išsiunčiame tą pačią dieną

Pinigų grąžinimo garantija

100% grąžinsime jūsų pinigus


Visada sprendžiame iškilusias problemas

Pagalba 24/7

Visą parą!